Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

Table 8-8: ADKCON and ADKCONR Register Bit Number Name Function 15 SET/CLR Control bit that allows setting or clearing of individual bits without affecting the rest of the register. If bit 15 is a 1, the specified bits are set. If bit 15 is a 0, the specified bits are cleared. 14 PRECOMP1 MSB of Precompensation specifier 13 PRECOMP0 LSB of Precompensation specifier Value of 00 selects none. Value of 01 selects 140 ns. Value of 10 selects 280 ns. Value of 11 selects 560 ns. 12 MFMPREC Value of 0 selects GCR Precompensation. Value of 1 selects MFM Precompensation. 10 WORDSYNC Value of 1 enables synchronizing and starting of DMA on disk read of a word.

The word on which to synchronize must be written into the DSKSYNC address ($DFF07E). This capability is highly useful. 9 MSBSYNC Value of 1 enables sync on most significant bit of the input (usually used for GCR). 8 FAST Value of 1 selects two microseconds per bit cell (usually MFM). Data must be valid raw MFM. 0 selects four microseconds per bit (usually GCR). - Interface Hardware 243 -