15 9 8 7 0 ------------------------------------------- 0 0 0 0 0 0 0 1 | | ------------------------------------------- --------------------------> Data gets shifted out this way Figure 8-12: Starting Appearance of SERDAT and Shift Register 15 9 8 7 0 ------------------------------------------- 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -------->| 1 | ------------------------------------------- 1 bit All zeros from the last shift - Figure 8-12: Ending Appearance of Shift Register The register stops shifting and signals "shift register empty" (TSRE) when there is a 1 bit present in the bit-shifted-out position and the rest of the contents of the shift register are 0s.
When new nonzero contents are loaded into this register, shifting begins again. SPECIFYING THE REGISTER CONTENTS The data to be transmitted is placed in the output register (SERDAT). Above the data bits, 1 bits must be added as stop bits. Normally, either one or two stop bits are sent. - 254 Interface Hardware -