Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

NAME ADD R/W CHIP FUNCTION ----------------------------------------------------------------------- BLTDDAT & *000 ER A Blitter destination early read (dummy address) DMACONR *002 R A P DMA control (and blitter status) read VPOSR *004 R A Read vert most signif. bit (and frame flop) VHPOSR *006 R A Read vert and horiz.

position of beam DSKDATR & *008 ER P Disk data early read (dummy address) JOY0DAT *00A R D Joystick-mouse 0 data (vert,horiz) JOY1DAT *00C R D Joystick-mouse 1 data (vert,horiz) CLXDAT *00E R D Collision data register (read and clear) ADKCONR *010 R P Audio, disk control register read POT0DAT *012 R P Pot counter pair 0 data (vert,horiz) POT1DAT *014 R P Pot counter pair 1 data (vert,horiz) POTGOR *016 R P Pot port data read (formerly POTINP) SERDATR *018 R P Serial port data and status read DSKBYTR *01A R P Disk data byte and status read INTENAR *01C R P Interrupt enable bits read INTREQR *01E R P Interrupt request bits read DSKPTH + *020 W A Disk pointer (high 3 bits) DSKPTL + *022 W A Disk pointer (low 15 bits) DSKLEN *024 W P Disk length DSKDAT & *026 W P Disk DMA data write REFPTR & *028 W A Refresh pointer VPOSW *02A W A Write vert most signif.

bit (and frame flop) VHPOSW *02C W A Write vert and horiz position of beam COPCON *02E W A Coprocessor control register (CDANG) SERDAT *030 W P Serial port data and stop bits write SERPER *032 W P Serial port period and control POTGO *034 W P Pot port data write and start JOYTEST *036 W D Write to all 4 joystick-mouse counters at once STREQU & *038 S D Strobe for horiz sync with VB and EQU STRVBL & *03A S D Strobe for horiz sync with VB (vert. blank) STRHOR & *03C S D P Strobe for horiz sync STRLONG & *03E S D Strobe for identification of long horiz. line.

BLTCON0 -040 W A Blitter control register 0 BLTCON1 -042 W A Blitter control register 1 BLTAFWM -044 W A Blitter first word mask for source A BLTALWM -046 W A Blitter last word mask for source A BLTCPTH + -048 W A Blitter pointer to source C (high 3 bits) BLTCPTL + -04A W A Blitter pointer to source C (low 15 bits) BLTBPTH + -04C W A Blitter pointer to source B (high 3 bits) BLTBPTL + -04E W A Blitter pointer to source B (low 15 bits) BLTAPTH + -050 W A Blitter pointer to source A (high 3 bits) BLTAPTL + -052 W A Blitter pointer to source A (low 15 bits) BLTDPTH + -054 W A Blitter pointer to destination D (high 3 bits) BLTDPTL + -056 W A Blitter pointer to destination D (low 15 bits) BLTSIZE -058 W A Blitter start and size (window width, height) -05A -05C -05E BLTCMOD -060 W A Blitter modulo for source C BLTBMOD -062 W A Blitter modulo for source B BLTAMOD -064 W A Blitter modulo for source A BLTDMOD -066 W A Blitter modulo for destination D -068 -06A -06C -06E BLTCDAT % -070 W A Blitter source C data register BLTBDAT % -072 W A Blitter source B data register BLTADAT % -074 W A Blitter source A data register