Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

Board Offset ($00/02) 7 6 5 4 3 2 1 0 Description of nibbles R/W info \___ ___/ \___ ___/ \/ \/ Nibble at $E80000 Nibble at $E80002 Figure G-1: How to read the Address Specification Table NOTE The bit numbering ( 7 6 5 4 3 2 1 0 ) is for use when two nibbles are to be interpreted together as a byte. Physically, each nibble is the high nibble of the word at its address (i.e. bits 15 14 13 12). Figure G-1: Address Specification Table OFFSET:

Address 1 Address 2 Description ------------------------------------------------------------------------- ($00/02) 7 6 5 4 3 2 1 0___Board size 000=8meg 100512k Read | | | | | \__|__/ 001=64k 101=1meg Not Inverted | | | | | 010=128k 110=2meg | | | | | 011=256k 111=4meg | | | | \-------- 1 = Next card is also on this board | | | \----------- 1 = Optional ROM vector valid | | \-------------- 1 = Link into memory free list (RAM) | \____________ \______________>---- Board type 00 = Reserved 01 = Reserved 10 = Reserved 11 = Current type ($04/06) 7 6 5 4 3 2 1 0 Manufacturers chosen product Read \___ ___/ \___ ___/ number Inverted \/ \/ Hi nibble Lo nibble ($08/0A) 7 6 5 4 3 2 1 0 (Remember - these read inverted) Read | | |_|_|_|_|_|_ Reserved - Should be 0 currently Inverted | | | \____________\ 0 = this board can be shut-up | / 1 = this board ignores shut-up | \______________\ 0 = any space OK / 1 = 8 Meg area preferred - 338 Appendix G -