After releasing KCLK, the keyboard jumps to its start-up code (internal RESET). This will initialize the keyboard in the same way as cold power-on. NOTE The keyboard must resend the "powerup key stream"! SPECIAL CODES The special codes that the keyboard uses to communicate with the main unit are summarized here. NOTE The special codes are 8-bit numbers; there is no up/down flag associated with them. However, the transmission bit order is the same as previously described. CODE NAME MEANING ----------------------------------------------------------------------- 78 Reset warning. CTRL-AMIGA, AMIGA has been hit - computer will be reset in 10 seconds.
(see text) F9 Last key code bad, next code i9 the same code retransmitted (used when keyboard and main unit get out of sync). FA Keyboard output buffer overflow FB Unused (was controller failure) FC Keyboard self test failed FD Initiate power-up key stream (keys pressed at powerup) FE Terminate power-up key stream FF Unused (was interrupt) - Appendix H 349 -