Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

To get the Copper to execute the correct list, you set an interrupt to the 68000 just after the first line of the display. When the interrupt is executed, you change the contents of the COP1LC location register to point to the second list. Then, during the vertical blanking interval, COP1LC will be automatically reset to point to the original list. For more information about interlaced displays, see Chapter 3, "Playfield Hardware." USING THE COPPER WITH THE BLITTER If the Copper is used to start up a sequence of blitter operations, it must wait for the blitter-finished interrupt before starting another blitter operation.

Changing blitter registers while the blitter is operating causes unpredictable results. For just this purpose, the WAIT instruction includes an additional control bit, called BFD (for blitter finished disable). Normally, this bit is a 1 and only the beam counter comparisons control the WAIT. When the BFD bit is a 0, the logic of the Copper WAIT instruction is modified. The Copper will WAIT until the beam counter comparison is true and the blitter has finished. The blitter has finished when the blitter-finished flag is set. This bit should be unset with caution. It could possibly prevent some screen displays or prevent objects from being displayed correctly.

For more information about using the blitter, see Chapter 6, "Blitter Hardware." THE COPPER AND THE 68000 On those occasions when the Copper's instructions do not suffice, you can interrupt the 68000 and use its instruction set instead. The 68000 can poll for interrupt flags set in the INTREQ register by various devices. To interrupt the 68000, use the Copper MOVE instruction to store a 1 into the following bits of INTREQ: Table 2-1: Interrupting the 68000 BITNUMBER NAME FUNCTION 15 SET/CLR Set/Clear control bit. Determines if bits written with a 1 get set or cleared. 4 COPEN Co-processor interrupting 68000. See Chapter 7, "System Control Hardware," for more information about interrupts.

- Coprocessor Hardware 31 -