Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

playfield or scroll the playfield through the window. You can also define display windows larger than the basic playfield. These larger playfields and different-sized display windows are described in The section below called "Bit-Planes and Display Windows of All Sizes." You determine the size of the display window by specifying the vertical and horizontal positions at which the window starts and stops and writing these positions to the display window registers. The resolution of vertical start and stop is one scan line. The resolution of horizontal start and stop is one low-resolution pixel.

Each position on the screen defines the horizontal and vertical position of some pixel, and this position is specified by the x and y coordinates of the pixel. This document shows the x and y coordinates in this form: (x,y). Although the coordinates begin at (0,0) in the upper left-hand corner of the screen, the first horizontal position normally used is $81 and the first vertical position is $2C. The horizontal and vertical starting positions are the same both for NTSC and for PAL. The hardware allows you to specify a starting position before ($81,$2C), but part of the display may not be visible.

The difference between the absolute starting position of (0,0) and the normal starling position of ($81,$2C) is the result of the way many video display monitors are designed. To overcome the distortion that can occur at the extreme edges of the screen, the scanning beam sweeps over a larger area than the front face of the screen can display. A starting position of ($81,$2C) centers a normal size display, leaving a border of eight low-resolution pixel around The display window. Figure 3-9 shows the relationship between the normal display window, the visible screen area, and the area actually covered by the scanning beam.

(0,0) / ($81,$2C) /______/____________________________ | ___/__________________________ | | | /_________________________ |\ | | | | /\ | | \| | | | | | \ | | | | | | |\ | | | |200 | | | \Visible screen | | | | | | | boundaries | | | | | | | | | |___\/_____________________| | | | |__\________________________/__| | |______\_____________________ /______| \ / \_____Display _____/ window starting & stopping positions Figure 3-9: Positioning the On-screen Display - 51 Playfield Hardware -