Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

; Start DMA ; MOVE.W #(DMAF_SETCLR!DMAF_RASTER!DMAF_MASTER),DMACON(a0) ; Enable bit-plane DMA only, no Copper ; Because this example has no Copper list, it sits in a ; loop waiting for the vertical blanking interval. When it ; comes, you check the LOF ( long frame bit in VPOSR. If ; LOF = 0, this is a short frame and the bit-plane pointers ; are set to point to S20050. If LOF = 1, then this is a ; long frame and the bit-plane pointers are set to point to ; $20000. This keeps the long and short frames in the ; right relationship to each other. VLOOP:

MOVE.W INTREQR(a0),d0 ; Read interrupt requests AND.W #$0020,d0 ; Mask off all but vertical blank BEQ VLOOP ; Loop until vertical blank comes MOVE.W #$0020,INTREQ(a0) ; Reset vertical interrupt MOVE.W VPOSR(a0),d0 ; Read LOF bit into d0 bit 15 BPL VL1 ; If LOF = 0, jump MOVE.L #$20000,BPL1PTH(a0) ; LOF = 1, point to $20000 BRA VLOOP ; Back to top VL1: MOVE.L #$20050,BPL1PTH(a0) ; LOF = 0, point to $20050 BRA VLOOP ; Back to top ; ; Character list ; CHARLIST: DC.L $18FC3DF0,$3C6666D8,$3C66C0CC,$667CC0CC DC.L $7E66C0CC,$C36666D8,$C3FC3DF0,$00000000 DC.L $FFFFFFFF - 61 Playfield Hardware -