Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

Combination 000 selects transparent mode, to show the color of whatever object (the other playfield, a sprite, or the background color) may be "behind" the playfield. Table 3-12 shows the color registers for high-resolution, dual-playfield mode. Table 3-12: Playfields 1 and 2 Color Registers- High-resolution Mode PLAYFIELD 1 Bit Color Combination Selected 00 Transparent mode 01 COLOR1 10 COLOR2 11 COLOR3 PLAYFIELD 2 Bit Color Combination Selected 00 Transparent mode 01 COLOR09 10 COLOR10 11 COLOR11 DUAL-PLAYFIELD PRIORITY AND CONTROL Either playfield 1 or 2 may have priority; that is, either one may be displayed in front of the other. Playfield 1 normally has priority.

The bit known as PF2PRI (bit 6) in register BPLCON2 is used to control priority. When PF2PRI = 1, playfield 2 has priority over playfield 1. When PF2PRI = 0, playfield 1 has priority. You can also control the relative priority of playfields and sprites. Chapter 7, "System Control Hardware" shows you how to control the priority of these objects. You can control the two playfields separately as follows: o They can have different-sized representations in memory, and different portions of each one can be selected for display. o They can be scrolled separately. - 66 Playfield Hardware -