Commodore Amiga 1000 — Commodore Amiga 1000 Hardware Reference Manual PDF Download

COLOR SELECTION IN HOLD-AND-MODIFY MODE In hold-and-modify mode, the color register contents are changed as shown in Table 3- 18. This mode is in effect only if bit 10 of BPLCON0 = 1. Table 3-18: Color Selection in Hold-and-modify Mode Bitplane 6 Bitplane 5 Result 0 0 Normal operation (use color register itself) 0 1 Hold green and red B = Bit-plane 4-1 contents 0 Hold green and blue R = Bit-plane 4-1 contents Hold blue and red G = Bit-plane 4-1 contents COLOR SELECTION IN HIGH-RESOLUTION MODE Table 3-19 shows playfield color selection in high-resolution mode. If the bit-combinations from the playfields are as shown, the color is taken from the color register number indicated.

- 90 Playfield Hardware -