Commodore Amiga 2000 — Commodore Amiga 2000 User & Service Manual PDF

6-14 Using Preferences page. Select either 6 or 8 lines per inch ( "Ipi"). LJ Spacing. This lets you select how closely lines are printed on the "elite"), and 15 pitch ( "fine"). Pitch. You use this to select the size of the characters that are | [ printed. You can select from among 10 pitch ( "pica"), 12 pitch ( higher-quality printing, select Letter. Quality. For faster but lower-quality printing, select Draft. For |_J Select Single if you're printing on individual sheets. Paper Type. Select Fanfold if you're using continuous- feed paper. i in characters, for the distance from the left-hand edge of the paper to ) \ where the right margin begins.

gadget to the right of the words Right Margin, then type in the width, right of the words Left Margin, then type in the width, in characters, j [ of the left margin. To specify the width of the right margin, select the paper. To specify the width of the left margin, select the gadget to the specifying numbers of characters from the left-hand edge of the Left and Right Margins. You indicate the width of these margins by j ing Custom for paper size may eliminate this. matrix printers, narrow blank lines appear across the printout. Select- j ^ Sometimes when printing in graphics mode on Epson and other dot lines.

1 [ labeled Length just below the paper sizes, then type in the number of select Custom, you must also specify, the number of lines that fit on | \ the size of the paper you're using. To do this, select the gadget You can use other sizes of paper by selecting Custom. When you tall), and Wide Tractor (14-7/8 inches wide, 11 inches tall). j [ wide, 14 inches tall), Narrow Tractor (9-1/2 inches wide, 11 inches Letter (8-1/2 inches wide, 11 inches tall), US Legal (8-1/2 inches Paper Size. There are four preset sizes you can select from: US \ 1 select the gadget labeled Serial. the upper left of the screen. If it's attached to the serial connector, :

' parallel connector on the Amiga, select the gadget labeled Parallel at Parallel or Serial Connection. If your printer is attached to the