' AmigaDOS and the CLI 7-23 f~| and delete the line DIR RAM: (and any other changes that refer to the RAM disk) you added to the Startup-Sequence. up normally, you need only re-enter the screen editor for the Startup-Sequence !~""^ When you now reset the Amiga, there will be a RAM disk icon along with the Workbench disk icon. To remove the RAM disk icon and have the Amiga boot it to the RAM disk. f—"! To add a tool, use the CLI copy command to create that particular tool and assign after the echo "Use Preferences tool to set date" line. DIR RAM: Sequence are carried out each time the Amiga is booted up. So, to create a RAM j I disk automatically when the Amiga boots up, type:
the screen editor are listed in Appendix B. Any changes you make to the Startup- r j This loads the Startup-Sequence for the screen editor. The commands for using ED s/Startup-Sequence From the CLI window, issue the command: 1 j mended for someone who does not really understand using CLI. Note: If you change the Startup-Sequence, make sure you are changing a copy of Workbench, and not the original Workbench disk. This operation is not recom- already activated, and perhaps a tool loaded into RAM. rH ple, you might find it convenient if the Amiga started up with the RAM disk up the screen. This is known as the Startup-Sequence.
If you feel comfortable j~ | using CLI, you can change the Startup-Sequence to suit your needs. For exam ! i When you power up or reset the Amiga, CLI issues a series of commands to set Changing the Startup-Sequence 1 * The RAM disk stays activated until the Amiga is turned off or reset. will remove Notepad from the RAM disk. I !