8-6 Adding to the Amiga 2000 I I printers and cannot print graphics. j j quality typewriters. However, they are slower than most dot matrix These print text of comparable quality to that produced by high- letter-quality printers. Daisy Wheel: Alphacom® Alphapro 101™, Brotherr® HR15-XL™, I j Diablo® Advantage D25™, Diablo 630™, and Qume LetterPro graphics. These dot matrix printers can produce both text and monochrome I I Dot Matrix: Epson® FX-80™ and RX-80™, Apple® imageWriter™, | | Commodore® MPS 1000™ and MPS 1250™ printers. Examples of printers you can use with an Amiga are:
Printers for the Amiga U and partition a hard disk drive.) 1 I Appendix G gives the general installation procedure and tells how to initialize , > (Instructions for installing a hard disk drive should be packed with the unit. backup and laser printers. , , quickest and easiest way to add up to 120MB of hard disk storage. There are other SCSI peripherals available, such as up to 80 tape streamers for hard disk companies today are making SCSI compatible hard disk drives. This is the ( Also available for the Amiga is the SCSI Interface, a high-speed parallel connec- tor that is compatible with both ST 506 and SCSI type hard disk drives.
Many Adding a Hard Disk Drive published by Bantam Books.) | j AmigaDOS Diskchange command, followed by the name of the disk drive, for the Amiga to recognize the disk. (For more details, see the AmigaDOS Manual insert a 5-1/4" disk. Once you have inserted the disk, you must enter the | | you to insert a disk. Unlike the 3.5" disks, the Amiga cannot detect when you u When using 5-1/4" disks on an Amiga, a system requester may appear that asks