Technical Reference A-7 TXC1 24 25 SS 23 RING INDICATOR RI SQD RI RI 22 21 L ATA TERMINAL READY DTR S.RTS DTR DTR 20 19 AUDIO INTO AMIGA AUDI 18 S.RXD RXC 16 17 S.TXD TXC 14 15 S.CTS 13 AUDIO OUT OF AMIGA SPEED INDICATE SI S.SD AUDO 12 11 + 12 VOLT CARRIER -12 VOLT CARRIER -12V + 12V 10 9 SYSTEM GROUND CARRIER DETECT GND DCD GND DCD GND DCD 8 7 DATA SET READY DSR DSR DSR 6 REQUEST TO SEND CLEAR TO SEND CTS RTS CTS RTS CTS 4 5 TRANSMIT DATA RECEIVE DATA RXD TXD RXD TXD RXD TXD 2 3 SHIELD GND GND SHIELD 1 Pin 2000 RS232 HAYES® Description Amiga external power. Connect these pins ONLY if power from them is required by the external device.
The table lists the power provided by each of these pins. WARNING: Pins 9 and 10 on the Amiga serial connector are used for other commonly used connections; the information in these two columns is given for comparison only. assignments. The third and fourth columns from the left give pin assignments for In the following table, the second column from the left gives the Amiga pin Serial Connector