2-7 information or a command to the computer. This key is sometimes referred to by the symbol ".J" or as the Enter key. The Caps Lock key, located next to the Ctrl key, forces all alphabetic keys (A through Z) to produce uppercase (capital) letters. Other keys, however, are not affected by the Caps Lock key. To type the upper characters on the nonalphabetic keys, you must still hold down one of the Shift keys and press the key for the desired character. When Caps Lock is active, a light on the key is illuminated. To inactivate Caps Lock, press the key again so that its light goes out.
The Tab key, located on the left side ofthe top row ofletters, can be program-defined to move the cursor to a set position. Tab is used extensively in word processing and desktop publishing programs. In addition, many Workbench programs that have several text gadgets let you use Tab and Shift+ Tab to move from gadget to gadget. The Backspace key is the key farthest right in the top row of the main keyboard. Pressing Backspace deletes any characters to the left of the cursor and causes the cursor, and any characters to the right of it, to move to the left.
The Esc (Escape) key, located at the top left of the keyboard, is a program-defined key, often used as a shortcut to leave or enter a program or a certain program mode. The Return key, located on the right side ofthe main keyboard area in the middle two rows, transmits The Amiga Keyboard Caps Lock Backspace Return Esc Tab