Commodore Amiga 4000 (A4000) — Commodore Amiga 4000 (A4000) User's Guide — Free Manual PDF Download

4-2 Adding Memory See Appendix A for detailed information on the required parameters of acceptable SIMM modules. memory types, Fast memory and Chip (graphics) memory, can be increased this way. Note Fast memory can also be added using Amiga bus and CPU slot boards; however, using the motherboard sockets leaves expansion slots free for other options. The following sections explain memory options and considerations, including: Fast memory (also called Fast RAM) is general purpose non-Chip memory that the microprocessor can access at full speed. The A4000 has four SIMM sockets for Fast RAM expansion. These are the four sockets nearest the edge of the motherboard.

The fifth socket is for Chip RAM expansion, covered in a later section. The four Fast RAM sockets are labeled on the motherboard as Banks 0,1,2, and 3, and they must be filled in that order. If your Amiga already has one or more banks occupied, place additional SIMMs in the next higher numbered banks. The Fast RAM SIMMs can be one of two memory sizes: one megabyte (1 MB) or four megabyte (4 MB). By filling the indicated banks with the appropriate size SIMMs, the following Fast RAM configurations are possible.

Fast versus Chip memory SIMM memory size Fast RAM bank locations Page mode versus static-column mode Installing SIMM units Testing memory installation Fast RAM Banks and SIMM Size Fast Memory