Commodore Amiga 4000 (A4000) — Commodore Amiga 4000 (A4000) User's Guide — Free Manual PDF Download

8-2 SERIAL Port In the following table, column two gives the Amiga pin assignments. Columns three and four give pin assignments for other commonly used connections; the information in these two columns is given for comparison only. Caution Pins 9 and 10 on the Amiga serial connector are used for external power. Connect these pins ONLY if power from them is required by the external device. The table lists the power provided by each of these pins. Pin 7 is the system ground. Do not connect this to shield ground on Pin 1. Connector type: D825 male SERIAL Port