AOC-LPZCR2 All-In-One Card User's Manual Figure 3.2 The Array Confi guration Utility Main Menu To Create Arrays (* Note: Make sure that the disks you want to use for the arrays are connected to your system and are initialized. A disk shown in the gray area is not initial- ized or it can be a member of an array already, so it cannot be used for an array at this point. Please refer to the section "Initializing Disk Drives" for disk initialization.) 1. Turn on your computer. When prompted, press and to access the Adaptec RAID Utility. 2. From the RAID Confi guration Menu (Figure 3.1 on Page 3-3), select "Array Confi guration Utility" and press .
The Array Confi guration Utility Main Menu (Figure 3.2) will display. 3. Select "Create Array" and hit as shown above. The Create Array submenu will display as shown on the next page. 3-4