Chapter 2: Technical Specifi cations and Installation 2.4 Installing the AOC-SIM1U-3B(+) Add-On Card 2.4.1 Safety Guidelines To avoid personal injury and property damage, please carefully follow all the safety steps listed below when installing the AOC-SIM1U-3B(+) into your system. ESD Safety Guidelines Electric Static Discharge (ESD) can damage electronic com ponents. To prevent dam- age to your system, it is important to handle it very carefully. The following measures are generally suffi cient to protect your equipment from ESD. • Use a grounded wrist strap designed to prevent static discharge. • Touch a grounded metal object before removing a component from the antistatic bag.
• Handle the add-on card by its edges only; do not touch its components, peripheral chips, memory modules or gold contacts. • When handling chips or modules, avoid touching their pins. • Put the card and peripherals back into their antistatic bags when not in use. General Safety Guidelines • Always disconnect power cables before installing or removing any components from the computer. • Use only the correct type of bracket for the add-on card. • Disconnect the power cable before removing any cable from the add-on card. • Make sure that the SIM1U-3B(+) add-on card is securely seated in the SIM1U-3B(+) slot to prevent damage to the system due to power shortage.
For SIM1U-3B(+) slot locations, please refer to Section 2.4.2. SMC Motherboards with SIM1U-3B(+) support The following Supermicro's motherboards support the AOC-SIM1U-3B(+). 1. The X7DBX-8/X7DBX-i Series 1. The X7DBP-8/X7DB-P-i Series 2-7