Chapter 3: Software Application and Usage c. Security Device Settings: Security 2 3 4 5 7 6 8 9 10 12 111 13 14 1 5 16 17 1 c. Security 1. Security: Click on this function key to activate its submenu and configure the fol lowing Security settings as listed below. 3. Force HTTPS for Web Access: Check this box to enable the function-Force HTTPS for Web Access. If enabled, you will need to use an HTTPS connection to access to the web. 2. Encryption Settings: This window allows you to configure encryption settings. 4. KVM Encryption: This option allows you to configure the encryption of the RFB protocol.
RFB is used by the remote host to transmit video data displayed in the host monitor to the local administrator machine, and transmit keyboard and mouse data from the local administrator machine back to the remote host. If set to "Off," no encryption will be used. If set to "Try," the applet (-JVM of the remote host) will attempt to make an encrypted connection. In this case, when a connection cannot be established, an unencrypted connection will be used. If set to "Force," the applet will make an encrypted connection. In this case, an error will be reported if no connection is made. 5. IP Access Control: This section allows you to configure the IP Access Control settings listed below. 3-29