Supermicro AOC-UINF-M2 Add-on Card User's Guide PDF Download (EN)

AOC-UINF-M2 Add-on Card User's Guide The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 1.0 Release Date:

March 17, 2008 Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not copy or otherwise reproduce/distribute any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2008 by SUPER MICRO COMPUTER INC. All rights reserved. Printed in the United States of America ii

Стр. 2

Safety Information and Technical Specifi cations Table of Contents Introduction Overview ............................................................................................................iv Product Features ................................................................................................iv Supported Operating Systems .......................................................................................v Required Cables .............................................................................................................v Supported Platforms .......................................................................................................v Motherboards ......................................................................................................v Servers ................................................................................................................v Contacting Supermicro ......................................................................................vii Returning Merchandise for Service .................................................................

viii Chapter 1 Safety Guidelines 1-1 ESD Safety Guidelines ................................................................................... 1-1 1-2 General Safety Guidelines .............................................................................. 1-1 1-3 An Important Note to Users ............................................................................ 1-2 Chapter 2 Add-on Card Components 2-1 Front Connectors and LEDs ........................................................................... 2-1 2-2 Front Connector and LED Defi nitions .............................................................

2-2 Chapter 3 Installation 3-1 Before Installation ........................................................................................... 3-1 3-2 Hardware Installation ...................................................................................... 3-1 3-3 Windows 2003/XP/2000 Driver Installation ..................................................... 3-2 iii

Стр. 3

AOC-UINF-M2 Add-on Card User's Guide Introduction Overview This manual is written for system integrators, PC technicians and knowledgeable PC users who intend to integrate Supermicro's AOC-UINF-M2 Add-on Card. Product Features The AOC-UINF-M2 offers the following features: Mellanox ® ConnectX DDR MT25408A0-FCC-GI Controller Low-profi le UIO form factor Dual CX4 Connectors 20Gb/s per port PCI-e X8 2.0 RoHS compliant 5/6 iv

Стр. 4

Safety Information and Technical Specifi cations Supported Operating Systems The AOC-UINF-M2 supports the following Operating Systems (OS): Windows Linux VMWare ESX Server Novell Required Cables The AOC-UINF-M2 requires CX4 copper-based cable: Up to 10m for 20Gb/s or 20m for 10Gb/s Supported Platforms Motherboards The following motherboards support the AOC-UINF-M2 add-on card. H8SMU, PDSMU, X7DAL-E, X7DAL-E+, X7DBN, X7DBU, X7DCU, X7DWA-N, X7DWN+, X7DWU or H8DMU+. Servers The following servers support the AOC-UINF-M2 add-on card.

5015M-Ni, 5015M-NT, 5015M-UR, 6015B-NT, 6015B-NTR, 6015B-U, 6015B-UR, 6015C-Ni, 6015C-NTR, 6015C-UR, 6015W-Ni, 6015W-NTR, 6015W-UR, 5025M- UR, 6025C-UR, 6025W-NTR+, 6025W-UR, 7045A-WT, 1011M-UR, 1011M-Ni and 1021M-UR+ v

Стр. 5