To start LisaGuide for the first time: 1. Be sure the Lisa is turned off. If the on-off button is lit, press it once. Wait until the light in the on-off button goes out. This will take a minute or so because the Lisa must put away the things on the desktop before turning off. 2. Insert the LisaGuide micro diskette into the drive. Make sure the arrow embossed on the diskette is pointing toward the drive. Push the diskette into the drive until you hear a click. 3. Turn the Lisa on: Press the on-off button once. The power will go on, and the button will light up. 4. After a few minutes, you'll see the phrase, "Welcome to STARTING LISAGUIDE LisaGuide," on the screen.
Now just follow the instructions on the screen. To stop or interrupt LisaGuide, follow the instructions on the next page. Section A. Getting Ready -- LisaGuide A9