0 Late collision frames 0 SymbolErr frames 0 Excess Defer frames 0 Collision fragments 0 Good (1 coll) frames 0 ValidUnderSize frames 0 Good (>1 coll) frames 0 InvalidOverSize frames 0 Deferred frames 0 ValidOverSize frames 0 Gold frames dropped 0 FcsErr frames 0 Gold frames truncated 0 Gold frames successful 0 1 collision frames 0 2 collision frames 0 3 collision frames 0 4 collision frames 0 5 collision frames 0 6 collision frames 0 7 collision frames 0 8 collision frames 0 9 collision frames 0 10 collision frames 0 11 collision frames 0 12 collision frames 0 13 collision frames 0 14 collision frames 0 15 collision frames 0 Excess collision frame Configuration Examples for Application Hosting The following are the various examples pertaining to the configuration of the Application Hosting feature.
Example: Enabling Cisco IOx This example shows how to enable Cisco IOx. Device> enable Device# configure terminal Device(config)# iox Device(config)# username cisco privilege 15 password 0 ciscoI Device(config)# end Example: Configuring Application Hosting on Front-Panel VLAN Ports This section is applicable to Cisco IOS XE Amsterdam 17.1.1 and later releases. Note This example shows how to configure application hosting on front-panel VLAN ports.
Device# configure terminal Device(config)# interface AppGigabitEthernet 1/0/1 Device(config-if)# switchport trunk allowed vlan 10-12,20 Device(config-if)# switchport mode trunk Application Hosting Configuration Examples for Application Hosting Application Hosting 38