Downloaded from https://www.everyspec.com (11) Provide technical guidance to Army Headquarters in the evaluation and management of occupational health risks from actual or potential exposures to workplace hazards. (12) Ensure that occupational health procedures and controls are implemented during the development and fielding of medical materiel and systems. (13) Establish policy and guidance for the selection of protective clothing and equipment for use in chemical operations. (14) Provide medical guidance for selecting appropriate protective equipment for use in the biological program.
(15) Review all radiation dose limits in excess of limits promulgated in this regulation and provide these increased limits to the Army RSO for promulgation as necessary. (16) Establish and promulgate Army radiological health guidelines for deployment operations. (17) Provide medical support for the Army’s activities in Joint chemical, biological, and nuclear surety programs as well as for the Army’s Chemical Agent Safety Program and the Army’s Biological Safety Program. m. The Provost Marshal General.
The PMG will— (1) Provide staff supervision over programs for motor vehicle traffic supervision to ensure that each installation properly integrates a traffic supervision program, traffic safety enforcement, and installation efforts to cooperate with traffic support programs at the state, regional, and national level. (2) Maintain liaison with appropriate staff agencies, other military departments, safety personnel, and external agencies on traffic safety and accident reporting systems. (3) Maintain liaison with the DOT and other Federal departments and agencies on the National Highway Safety Program Standards and programs that apply to military traffic supervision.
(4) Participate in the national effort to reduce intoxicated driving and alcohol safety action projects in neighboring communities. n. Army Operations Center. The AOC will— (1) Serve as the DOD coordination center for emergency response to transportation accidents in the continental United States (CONUS) involving munitions and explosives. (2) Determine the military installation nearest the accident and task the installation to provide immediate assistance and/or support, and notify the appropriate military department to contact the installation. (3) Task U.S.
Army Forces Command (FORSCOM), Operations Center, to arrange for EOD service/support from the nearest EOD unit regardless of the service affiliation. (4) Notify Headquarters, Surface Deployment and Distribution Command (SDDC) and the Department of Transpor- tation (DOT) of all transportation accidents involving munitions and explosives. o. Commanding General, U.S. Army Forces Command. The CG, FORSCOM will— (1) Coordinate activities across the Army to integrate CRM into programs to protect the force. (2) Establish safety policy, standards, and guidance for use in exercises, maneuvers, and tactical operations.
(3) Provide EOD assets and emergency responders to installations and combatant commanders as required. (4) Provide escort of off post chemical surety material and recovered chemical warfare material (RCWM) as requested or required. p. Commanding General, U.S. Army Training and Doctrine Command. The CG, TRADOC will— (1) Integrate safety and CRM training into the curricula of Army schools. (2) Ensure that the combat developer incorporates system-safety performance objectives into the concept formula- tion package. (3) Incorporate safe operating practices and physical standards in field manuals, training circulars, and other documents.
(4) Establish and maintain Armywide branch specific safety oversight and communications required to gather and disseminate branch safety specific information on current tactics, techniques, and procedures, accidents, near-miss events, and emerging trends. (5) Integrate safety, CRM, and lessons learned into all branch proponent doctrine, training, and systems. (6) Integrate safety considerations into new equipment training. (7) Direct Combat Development Centers to identify hazards and requisite safety standards to be met in critical combat tasks as part of task analysis.
(8) Direct Combat Development Centers to incorporate critical safety parameters in the requirements documents for new systems acquisitions and ensure operational tests verify the product provides requisite protection. (9) Provide the combat developer position on materiel solutions. (10) Serve as risk management integration proponent for doctrine, training, and combat development.
(11) Coordinate risk management integration activities across the Army and at Joint-level into programs to develop the force to include doctrine development, requirements definition, common applications, training support, and risk management education in the Army, including Army forces (ARFOR) component in the Joint-level functions. 5 AR 385–10 • 23 August 2007/RAR 4 October 2011