WARNINGS • Always perform automotive testing in a safe environment. • DO NOT smoke near the vehicle during testing. • DO NOT place the diagnostic tool near the engine or exhaust pipe EN to avoid damage from high temperatures. • DO NOT wear loose clothing or jewelry when working on an engine. • DO NOT connect or disconnect any test equipment while the ignition is on or the engine is running. • DO NOT disassemble the code reader. • Engine parts will become hot when the engine is running. To prevent severe burns, avoid contact with hot engine parts. • When an engine is running, it produces carbon monoxide, a toxic and poisonous gas. Operate the vehicle ONLY in a well-ventilated area.
• Wear safety eye protection that meets ANSI standards. CAUTIONS • Please ensure that the vehicle battery is fully charged and the scanner is firmly connected to the vehicle DLC to avoid erroneous data generated by the scanner and diagnostic systems. • Please do not use the diagnostic tool during driving. • Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts. • Keep the scanner dry, clean, free from oil/water, or grease. Use a mild detergent on a clean cloth to clean the outside of the scan tool, when necessary. • Keep the scanner out of the reach of children. 27