AS-4000 User’s Guide Color Matching for Spot Colors Color Matching for Spot Colors Performing Color Matching for Spot Colors Spot colors used for printing are grouped by Epson Edge Print Label to manage the output adjustment values. In the following situations you can use the batch adjustment function to adjust the output color to an appropriate color for each group or change the color.
❏ When matching to a specified color (the color of the print sample) ❏ When using spot colors registered to a created group for a new substrate or print setting This section explains how to match the color for the spot color, assuming that the substrate to be used has already been introduced or the printing information to be used has already been added on the press. Workflow 50 Contents Operation Points and Workers Loading the Substrate to be Used U “Loading the Substrate” on page 18 Press Press operator Check the light intensity for the substrate's base color area, and set the threshold if the light intensity is less than 4000 or the substrate is not white.
U “Setting the Registration Mark Sensor Amplifier Threshold Value” on page 46 Press Press operator Register the Substrate Width and Substrate Margin According to the Substrate Being Used U Help for Epson Edge Print Label Epson Edge Print Label Pre-press operator Create a Quick Set and Make the Necessary Settings for Spot Color Matching U “Creating Quick Sets” on page 51