AS-4000 User’s Guide Checking Colors C If the color difference is within the standards for the inspection, press Continue to print the actual job. If there are colors that exceed the standard values, press Cancel Job and see the following to take action. U “If the Results for the Before Printing or After Printing Checks Exceed the Standard Values in Check Job Spot Color Accuracy” on page 98 Checking the Results of the After Printing Check When you have finished performing color measurements for the chart, check the results for color accuracy.
This section explains how to check when the results are displayed regardless of whether or not there is a problem, assuming that Display Check Results was set to Enable beforehand. A Press Check Results on the Operation Status screen. B Press the After Printing tab to check the print results. The number of colors where the color difference between the standard spot color and the chart is within the standard values are displayed in the inspection results. You can check the details for each color in the list at the bottom of the screen. 64