AS-4000 User’s Guide Troubleshooting ❏ Recreate the ICC profile ❏ If you have changed the print mode and so on after creating the ICC profile, we recommend recreating the ICC profile. ❏ If you are using an ICC profile that is being shared by multiple presses, recreate the calibration data. ❏ If the above solutions do not solve the problem This may be due to physical factors such as dirt on parts of the press. Cleaning parts may clear the problem. U “Cleaning the Backing” on page 74 U “Stirring the Ink Cartridges” on page 102 U “Performing Head Cleaning” on page 102 ❏ If cleaning does not solve the problem Recreate the calibration data.
If the Results for the Before Printing or After Printing Checks Exceed the Standard Values in Check Job Spot Color Accuracy Take the following actions in order. Once the problem has been resolved, you do not have to try any further solutions. ❏ Select a Color Collection created by Group Adjusting Spot Colors If the Color Collection created by Group Adjusting Spot Colors is not selected correctly in the Quick Set, printing may not be performed using the correct colors. If it is not selected, select the Color Collection.
❏ Review the Density Control and Halftone Screen settings in the preset If Density Control or Halftone Screen settings have been made in the preset, the colors in the print results will change. Review the settings as necessary. ❏ If you change the print information, recreate the calibration data If you change the print information after creating the calibration data, you need to recreate the calibration data. ❏ If you change the print information, perform Group Adjusting Spot Colors again Set the print information again, and then perform Group Adjusting Spot Colors. ❏ If the above solutions do not solve the problem This may be due to physical factors such as dirt on parts of the press.
Cleaning parts may clear the problem. U “Cleaning the Backing” on page 74 U “Stirring the Ink Cartridges” on page 102 U “Performing Head Cleaning” on page 102 ❏ If cleaning does not solve the problem Perform Group Adjusting Spot Colors from Epson Edge Print Label. U “Performing Group Adjustments for Spot Colors” on page 52 98