Chapter 2 Installing Hardware 2_ Network modules: Load cell modules: Function cards:
2-9 5 VDC, 2-axis, 4 differential outputs, high-speed output frequency at 200 k Hz AS04PU-A 4-axis motion control 24 VDC, 5mA, 6 outputs, maximum hardware input bandwidth at 10 k Hz 5-30 VDC, 0.1A, 4-axis, 8 NPN outputs, maximum high-speed frequency at 100 kHz AS00SCM-A Serial communication module, 2x communication ports, applicable to communication cards, supporting MODBUS protocols and user defined protocols, can be used for a network communication module (when working with a network communication card) AS01DNET-A DeviceNet communication port, functioning as master or slave AS04SIL0-A IO-Link module, built-in 4x IO-Link communication ports AS02LC-A 2-channel, 4-wire/6-wire load cell sensor Eigenvalue applicable to a load cell:
1, 2, 4, 6, 20, 40, 80 mV/V Highest precision 1/10000 @ 50ms of the conversion time ADC Resolution : 24 bits Conversion time: 2.5–400ms (nine options to choose from) AS-F232 Serial communication port, RS232, functioning as master or slave AS-F422 Serial communication port, RS422, functioning as master or slave AS-F485 Serial communication port, RS485, functioning as master or slave AS-FCOPM CANopen communication port, supporting DS301, AS series remote modules and Delta servo systems AS-F2AD 2-channel analog input 0–10V (12 bits), 4–20mA (11 bits) Conversion time: 3ms/channel AS-F2DA 2-channel analog input