Chapter 7 Load Cell Module AS02LC 7.2.5 Functions 7_ 7-11 Input value Description Input value Description 105 Restore the weight measured by CH2 to 0. 16#0302 Start a theoretical calibration for channel 2. 16#030F Start a theoretical calibration for channels 1–2. 16#0502 Restore default settings Item Function Description 1 Measuring net weight Various measuring modes to choose from 2 Stability check When an object is put on a load cell, you can check whether the present weight of the object is in a specified stability range. 3 Determining zero point If an object is removed from the load cell, no weight is measured.
4 Filter out weights Filter out the maximum or minimum weight measured or use an average weight for a more accurate value. 5 Multi-point adjustment There are as many as 20 points for adjustment 6 Theoretical calibration Calibration based on the output value of the sensor instead of the real weight calibration 7 Zero point tracking Zero point tracking 8 Limit detections for channels Save the maximum and minimum values for channels. 9 Records for channels Save the analog curves for channels.