Chapter 8 Serial Communication Module AS00SCM 4. After the settings are complete, click the Downloader icon and then select the parameters that you’d like to download. Parameters include: RTU parameters: all the parameters set in the previous step Data Exchange: data mapped from the RTU right-side modules of AS00SCM-A to the PLC 5. While downloading, the connection of PLC and RTU is off. After the downloading is complete, the connection will be re-established. Refer to section 8.4.3 for more details on the connection establishment of AS00SCM-A RTU modules.
8.4.2.2 Connecting to 3 rd Party PLC Scanner through EIP Builder Through EIP Builder, a 3 rd party PLC (when acting as a scanner) can create an EtherNet/IP connection to AS00SCM-A (when AS-FEN02 is installed). Use the 3 rd party PLC to connect to the computer and open EIP Builder to edit the right side modules of AS00SCM-A. You can manually or scan the network to add the AS00SCM(RTU) + AS-FEN02 to the network. Click the remote module to open HWCONFIG to scan and download the parameters of the right side modules of AS00SCM-A. 8_ 8-23