Delta Electronics — 8.6.3 Remote IO Application (AS-FCOPM)

Chapter 8 Serial Communication Module AS00SCM 28) Use the monitor function in ISPSoft to verify that the transmission is working correctly. 29) In SCMSoft, right-click the item COM PORT History on the left and click the option “Upload COM History Data” to see the transmission history of COM1 and COM2 respectively. Under the item COM1 and COM2, you can view recent transmission history; however the shown recent history cannot be deleted or saved. 30) Select Tools -> Return to Default to clear the previous settings and have all the settings back to defaults. After this, turn the power off and on again.

8.6.3 Remote IO Application (AS-FCOPM) This example shows other series PLC, AH10COPM-5A, as a CANopen Master that controls four IO modules on the right side of AS00SCM-A that acts as a CANopen Slave. (You can use this method to connect to a 3 rd party PLC.) 8_ 8-55 Device Function AS300 Scan and download AS00SCM-A (RTU mode), right side module configurations AS00SCM-A + AS-FCOPM CANopen Slave AHCPU530-EN + AH10COPM-5A CANopen Master AS16AN10R-A 16 Digital outputs AS16AM01N-A 16 Digital inputs AS04DA-A 4 Analog channels for output AS04AD-A 4 Analog channels for input