AS Series Module Manual 7. Records for Channels Record the input values of the cyclic sampling for each channel. The system saves up to 500 data points and the recording time is 10 ms. Value of the channel 500 records of data Time Instruction for recording Recording ends _4 8. Scale range When the format is floating-point, you can set the scale range. The analog output mode of a channel has a corresponding digital range. Digital values correspond to analog outputs sent by the module. For example, if the analog range is -10 V to +10 V, the digital range is -10.0 to +10.0, the HSP scale is 10.0, and the LSP scale is -10.0.
The digital values -10.0 to +10.0 correspond to the analog values -10 V to +10 V, as the example below shows. Analog value 10 V Rated output range -10 V Digital value 10.0 -10.0 Scale range Analog Output 4-16 Item Function Description 1 Enable/Disable a Channel 1. Enable or disable a channel. 2. If a channel is disabled, the total conversion time decreases. 2 Calibration Calibrate a linear curve. 3 Retain an Output When a module stops running, the system retains the signal sent by the