AS Series Module Manual *4. Connect the shielded cable to the terminal FE and to the ground terminal. *5. Connect the terminal to the ground terminal. *6. The wording “CHX-I” indicates that you can use those five wiring methods for every input channel. The wording “CHX-O” indicates that you can use those two wiring methods for every output channel. 5.2.7 LED Indicators _5 5-22 Number Name Description Operating status of the module 1 RUN LED Indicator ON: the module is running. OFF: the module is not running. Error status of the module ERROR LED ON: a serious error exists in the module. 2 Indicator OFF: the module is operating normally. Blink: a minor error exists in the module.
Analog-to-Digital Conversion status 3 Conversion Blinking: conversion is in process. Indicator OFF: conversion has stopped.