AS Series Module Manual 6.4 DIADesigner+ (Hardware Configuration) The following example uses AS04DTD-A. 6.4.1 Initial Setting (1) Start DIADesigner+, click New Project , and then Project+Device to create a new project. (2) Add modules in: _6 ➁ Select the + section and drag and drop the module that you want to add from the Product List to the + ➀ Double-click Hardware Configuration section. or ➂ Right-click Delta_Localbus Master to see the context meun and then double-click Add Device to add devices manually or double-click Scan for Devices . 6-30