Delta Electronics — 8.3.3 Adjustment Settings / Calibrational Commands

AS Series Module Manual Step 5: enter the command for activating the weight calibration 98 into D28007. Step 6: put no load on the load cell (adjustment point 1) and enter 1 into D28007. 1 represents CH1 and 2 represents CH2. Step 7: put a load on the load cell (adjustment point 2). For multi-point adjustment, repeat this step. This example uses a 1 kg weight. Step 8: to complete the adjustment, enter the command for deactivating the weight calibration 99 into D28007. A characteristic curve is shown below. _8 Weight 10 kg Point 1 k g Digital value 1000 10000 0 Adjusting two points 8-26