Delta Electronics — 9.6.1.2 Modbus Master ─ Connection to Delta Products

AS Series Module Manual 9.6.1.2 Modbus Master ─ Connection to Delta Products This section introduces how to use COM2 to connect the AS00SCM-A to other Delta industrial products such as programmable logic controllers, AC motor drives, and servo motors. The structures: Example of a master structure: AS-F485 + AS00SCM-A COM2 (master station)  VFD, ASDA, and DVP series PLC If the AS00SCM-A is functioning as a Modbus master, you need to set a slave ID and baud rate. 1) Drag to add AS00SCM-A in the system configuration area. Make sure the knob of AS00SCM-A is turned to COM mode and no power connected to it.

_9 9-42 Product Slave ID Communication protocol Device from Register in Device into Register in which data is the CPU which data is the CPU read module written module VFD 10 38400, ASCII, 7, E, 1 16#2103 D26200 16#2000 16#2001 D26300- D26301 ASDA 11 38400, ASCII, 7, E, 1 16#0101 D26210 16#0101 D26310 PLC 12 38400, ASCII, 7, E, 1 D100-D109 D26220- D26229 D200-D204 D26320- D26324