Chapter 9 Serial Communication Module AS00SCM 6) Set up the data exchange table: select Data Exchange – COM2 and click Add to create a new Data Exchange Setup table. 7) In the Data Exchange Setup table double-click an item to edit its settings. Select Standard Modbus Device as the Remote Device Type , enter the parameters, and check Enable . 9_ 9-45 Product Slave ID Communication protocol Device from Register in Device into Register in which data is the CPU which data is the CPU read module written module VFD 10 38400, ASCII, 7, E, 1 16#2103 D26200 16#2000 16#2001 D26300- D26301