Chapter 10 Function Cards Step 4 Click the Downloader icon and then select the parameters that you’d like to download. After the scanner starts to run, check if the data stored in the adapter D300 and D200 increment by 1 every second to determine if the data mapping is going well. 10.2.7.7 Example of Connecting to 3rd Party PLC Scanner through EIP Builder Through EIP Builder, a 3 rd party PLC (when acting as a scanner) can create an EtherNet/IP connection to AS300 Series PLC (when AS-FEN02 is installed). The following example uses Rockwell PLC as a scanner and Rockwell software Studio 5000 to perform data mapping with a Delta PLC.
Before you begin, you need to go to www.deltaww.com to download EDS file. (1) Use EDS Hardware Installation Tool to install the EDS file of ASCPU (AS-FEN02). 10 10-13