AS Series Module Manual 10.3.4 AS-FEN02 42 1 2 88 3 4 5 61.5 6 Unit: mm RJ-45 Pin Definition 10 10-50 25.2 Number Name Description Indicates the status of the communication card Green light ON: the operation is working normal Green light BLINKING: the setting is not complete 1 MS indicator Red light ON: internal communication fail, can NOT be recovered Red light BLINKING: internal communication timeout OFF: no power Indicates the status of Ethernet connection Green light ON: a CIP connection is established Green light BLINKING: a CIP connection is not established after power-on 2 NS indicator Red light ON: duplicated IP address Red light BLINKING:
communication timeout (a CIP connection has been established after power-on) / IP address change OFF: no power / network cable is not connected 3 RJ-45 port X1/X2 For network connections Indicate the status of Ethernet connection 4 LINK indicator X1/X2 Green light ON: a network connection is established OFF: a network connection is not established Indicate the status of Ethernet communication 5 ACT indicator X1/X2 Orange BLINKING: data transmission OFF: no data transmission 6 Clip ring Secures AS series Pin No. RJ-45 1 TX+ 2 TX- 3 RX+ 4 N/C 5 N/C 6 RX- 7 N/C 8 N/C