Chapter 11 DeviceNet Master Scanner Module AS01DNET-A Symbol: 11 Explanation: S1 is the sequence number of the module on the right of the PLC. The number of the first module is 1; the second module is 2 and so on. Any type of module need be numbered within the range of 1~32. If the number is out of the range, the instruction will take the minimum (1) or maximum (32) for operation. S2 is a DeviceNet node address within the range of 0~63. Users can specify the node address of a slave which the master is to read and write. It also can be the node address of the master, which means to read and write the data in the master.
11-31 DNETRW S1 D1 S2 D2 S3 D3 S4 D4 S5 D5 S6 S7 S8 S9 S10 The sequence number of the DeviceNet communication module S1 DeviceNet node address (MAC ID) S2 Service Code S3 Class ID S4 Instance ID S5 Attribute ID S6 Written-data size S7 The start device where written data are stored S8 Communication timeout time S9 Times of re-transmission S10 Completion flag D1 Error flag D2 Error code D3 Read-data size D4 The start device where read data are stored D5