Delta Electronics — 11.5.4.2.2. Main Configuration Page of AS01DNET (RTU)

Chapter 11 DeviceNet Master Scanner Module AS01DNET-A 11 3. Clicking the Scan button on the page, the main AS01DNET (RTU) configuration page changes as below. 11-61 Item Description Start Monitor Watch and set in real time the configured exchange data in current system; change output data, watch input data and use control word to control the operation state of AS01DNET (RTU) in real time. Name Name of each module Firmware Firmware version of each module. Choosing corresponding version of firmware, download the module parameter information which matches the firmware version. Description The description of basic information of each module.

Input The mapping range of input data of each module, determined by start address offset of mapping input data and the size. Output The mapping range of output data of each module, determined by start address offset of mapping output data and the size. Comment Add a comment for each I/O modules OK The current configuration data will not be saved until you click the OK button to finish the configuration. Cancel Clicking the Cancel button to exit AS01DNET (RTU) configuration page, current configuration data will not be saved.