Chapter 12 Positioning Module AS02/04PU 12.2.2. Profile 7 12 Unit: mm 12-5 .3 8 38.2 95 1 2 3 4 5 6 75 95 7 98 8 2 35 8 9 Number Name Description 1 Model name Model name of the module Indicates the status of the power supply POWER LED indicator ON: the power is on (Blue) OFF: no power Operating status of the module Run LED indicator ON: the module is running and ready to accept instructions. (Green) OFF: the module is stopped and can NOT accept instrucitons. Error status of the module 2 Error LED indicator OFF: the module is normal. (Red) Blinking (0.2 seconds ON/OFF): hardware error occurs in the module, can NOT operate normally Input LED indicator ON: Receives an input signal (Red) OFF:
Receives no input signal Output LED indicator ON: Receives an output signal (Red) OFF: Receives no output signal Removable terminal The inputs are connected to sensors. 3 block The outputs are connected to loads to be driven. Arrangement of the 4 Arrangement of the terminals input/output terminals 5 Terminal block clip Removal of the terminal block 6 DIN rail clip Secures the module onto the DIN rail