Delta Electronics — 13.6 Module Status Codes

AS Series Module Manual 13.6 Module Status Codes The following error codes identify possible errors when the AS04SIL module as a communication module is installed on the right side of the CPU module or RTU module. _13 13-42 Error Description Solution Code 16#1605 Hardware failure Install a new AS04SIL or contact the factory. 16#1606 24VDC power supply is not sufficient and then recovered from low-voltage for less than 10 ms. Check whether the 24 V power supply to the module is normal. Error Description Solution Code 16#1800 Error occurs in IO-Link Master See section 13.5 for more information. 16#1801 Error occurs in IO-Link device See section 13.5 for more information.

16#1802 No external power supply Check the external power supply 16#1803 Error in the download of IO-Link device mapping tables Redownload the configuration by the software 16#1804 Failure to switch the process data parameter set Check if the connected device is the same as that configured in the software. 16#1805 Error occurs in the communication port 1 of IO-Link connection 1. Cut the external power off for 3 seconds and power-on again 2.

Download the configurations again 16#1806 Error occurs in the communication port 2 of IO-Link connection 16#1807 Error occurs in the communication port 3 of IO-Link connection 16#1808 Error occurs in the communication port 4 of IO-Link connection 16#1809 Error occurs in scan device and force to stop scanning 1. Cut the external power off for 3 seconds and power-on again 2. Scan all devices again