Chapter 14 High Speed Counter Module AS02HC Specifications and Functions Specifications Functional specification 14 14-3 Item Description Number of channels 2 Pulse Input Input type Phase A/B differential pulse input (multiplication x2/4), CW/CCW pulse inputs and pulse + direction inputs Max. counting 200 kHz frequency Max. transmission 200 kHz → 30 m distance Counter type Ring counter, linear counter SSI Input Max. data length 31-bit (The single-turn, multi-turn and status data length can be set.) Coding method binary code, gray code Transmission frequency 250 kHz, 500 kHz, 625 kHz, 1 MHz, 1.25 MHz Max.
transmission distance 250 kHz → 150 m 500 kHz → 50 m 625 kHz → 40 m 1 MHz → 20 m 1.25 MHz → 10 m Parity check None, odd parity, even parity Counter type Absolute counter and ring counter Counter Counting range -2147483648 ~ 2147483647 (32-bit counter) Counter control Reset, preset, gate, capture offset correction for absolute position State check Count direction, counting overflow/underflow, linear counting beyond the lower and upper limit values, SSI feedback, SSI position exceeding the protection limit, SSI parity checking, SSI communication status, a zero point is set beyond SSI encoder resolution External input point (phase Z) Input point 2 (one point per channel) number Function Counter reset, gate control, counting value capture Digital filtering Disabled, 100 us, 200 us …20 ms Min.
software 10 us (hardware response time included) interrupt response time External output point Output point 4 number Output type NPN transistor (sinking) Comparison function Instruction General comparison output instruction, table comparison output instruction Interrupt Using comparison to achieve the interrupt function Measurement function Measured item Pulse rate and rotation rate (RPM) Average times 1 ~ 10 times