AS Series Module Manual Profile 14 14-6 7 5 6 5 75 1 98.3 88 2 3 4 35 88 98.3 35 Name Description Number Name Description 1 Model name Model name of the module 2 POWER LED indicator Indicates the status of the power supply ON: The power is on. OFF: No power Error LED indicator Error status of the module ON: A serious error occurs in the module. OFF: The module is normal. Blinking: A minor error occurs in the module. Counter LED indicator for Ch1 Act. & Ch2 Act. Counting status of the module (Green) OFF: The counter is disabled. When the pulse input takes place: ON: The counter is enabled but the result of counting is not changed. Blinking: The result of counting is updating.
When the SSI input takes place: Blinking: The counter is enabled and the position value is updating. Input / output LED indicator ON: Receives an input / output signal OFF: Receives no input / output signal Refer to section 14.2.8 for details. 3 D-sub15 Input: Connected for pulse input and encoder Output: Connected to loads to be driven Power: Providing external encoder +5 VDC 4 DIN rail clip Secures the module onto the DIN rail 5 Extension module port Connects extension modules 6 Ground clip For Grounding 7 Label Nameplate