AS Series Module Manual 14 The impact of AS CPU Status on AS02HC-A The following table lists the module execution states corresponding to AS CPU operation states of poweroff, and Run -> program. Stop.
After the AS CPU state switches from Stop to Run, the operation state of AS02HC-A module is controlled by the PLC 14-22 Instruction Symbol Function DHCCMPT (Table comparison output) Enable/disable table comparison output function Set comparison values for up to ten points Set comparison-matched action Show comparison-matched status DHCMEAS (Rotation rate measurement) Enable/disable measurement function Set average times Show measured frequency Show measured rotations per minute Item Poweroff, CPU Run -> Stop Y0.0~Y0.3 Reset to OFF Phase Z Disabled Counter The counting stops and counter state is cleared. DHCCNT The instruction is disabled. HCDO The instruction is disabled.
DHCCAP The instruction is disabled. DHCCMP The instruction is disabled; MATCH1 and MATCH2 are cleared. DHCCMPT The instruction is disabled and CurNo is cleared. DHCMEAS The instruction is disabled.