Delta Electronics — 6.26.2 Explanation of High-speed Output Instructions

AS Series Programming Manual Example 1. Draw a DELTA LOGO as the figure below. 2. Steps: divide the logo into three parts.  For an ellipse: use the DCICR instruction for the relative-position clockwise arc interpolation.  The absolute coordinates of the ellipse: P1 ( 39930 , -9982 ) , P2 ( -9982 , 39930 ) , P3 ( 73206 , 123119 ) and P4 ( 123119 , 73206 ) . _6  Taking ( 39930 , -9982 ) as the starting point, yields these relative coordinates: ( -49912 , 49912 ) , ( 83188 , 83189 ) , ( 49913 , -49913 ) and ( -83189 , -83188 ) . 6-850