AS Series Programming Manual _2 2-106 Special data Time to refresh register scanned. If the instruction is not executed, you can edit the setting. SR536–SR537 Register is refreshed by a user. SR540 Refresh the register whenever the high-speed output instruction is executed and the program is scanned. If the instruction is not executed, you can edit the settings. SR542–SR546 Register is refreshed by a user. SR547 Register is refreshed by the system. SR548–SR549 Refresh the register when the PLC is supplied with power according to the position planning table. You can edit the settings afterwards SR550 Register is refreshed by the system. SR552 Register is refreshed by you.
SR554 Refresh the register whenever the high-speed output instruction is executed and the program is scanned. If the instruction is not executed, you can edit the settings. SR556–SR557 Register is refreshed by you. SR560 Refresh the register whenever the high-speed output instruction is executed and the program is scanned. If the instruction is not executed, you can edit the settings. SR562–SR566 Register is refreshed by you. SR567 Register is refreshed by the system. SR568–SR569 Refresh the register when the PLC is powered on according to the position planning table. You can edit the settings afterwards. SR570 Register is refreshed by the system. SR572 Register is refreshed by you.
SR574 Refresh the register whenever the high-speed output instruction is executed and the program is scanned. If the instruction is not executed, you can edit the settings. SR576–SR577 Register is refreshed by you. SR580–SR603 Refresh the register according to the settings in HWCONFIG when the PLC is powered on. You can edit the settings afterwards. SR604–SR609 Register is refreshed by you. SR610–SR621 Refresh the register whenever the output instruction is executed. SR623–SR634 Refresh the register whenever the EIX or DIX instruction is executed. ON: interrupt is enabled OFF: interrupt is disabled SR640–SR651 Register is refreshed by you. SR652–SR655 Register is refreshed by the system.
SR658–SR726 Register is refreshed by the system. SR731–SR738 Register is refreshed by the system. SR741–SR748 Register is refreshed by the system. SR751-SR768 Register is refreshed by you. SR771–SR778 Register is refreshed by the system. SR781–SR788 Register is refreshed by the system. SR791–SR806 Register is refreshed by the system. SR811–SR818 Register is refreshed by you. SR820 Refresh the register according to the settings in CANopen Builder. SR821 Refresh the register when the firmware is updated. SR822 Refresh the register according to the settings in HWCONFIG. SR823–SR893 Register is refreshed by the system. SR900–SR901 Register is refreshed by the system.
SR902 Register is refreshed by you.