AS Series Programming Manual 3.2.2 Applied Instructions (Sorted numerically) This section describes the table format that this chapter uses to describe applied instructions (sorted by API number) in Section 3.4.1. _3 Description: : The applied instruction number : The instruction name : If a 16-bit instruction can be used as a 32-bit instruction, add a D in front of the 16-bit instruction to form the 32-bit instruction. : indicates that you can use the instruction as a pulse instruction, whereas ─ indicates that it cannot be used as a pulse instruction. For pulse instructions, add a P in back of the instruction. :
The symbol for the instruction in the ladder diagram in ISPSoft : The function of the instruction : For single-precision floating-point instructions (32-bit), an F appears in the instruction. 3-4